Nonlinear elastic constitutive relations of residually stressed composites with stiff curved fibres

Applied Mathematics and Mechanics - Mechanical models of residually stressed fibre-reinforced solids, which do not resist bending, have been developed in the literature. However, in some residually...     

Emerging Trends in Fluorescence Bioimaging of Divalent Metal Cations Using Small-Molecule Indicators

Visualization of cation dynamics inside a living system represent a major breakthrough at the crossroad of chemistry and cellular physiology. Since the inception of BAPTA-based cellular calcium indicators in the 1980s, generations of chemical and genetically encoded ion indicators spanning the visible spectrum have been developed. In this article, we bring up three emerging concepts in this field: 1. red-shifting cation indicators towards far-red and near-infrared (NIR) channels; 2. directing the indicators to various subcellular localizations; 3. lowering the phototoxicity of indicators for long term recording. These initiatives collectively echo the advocate of 4D cellular physiology, where biological processes within living systems can be panoramically unveiled under 3D, long-term, and multi-channel imaging with unprecedented spatial and temporal resolution. This outlook poses exciting challenges and opportunities for chemists to upgrade the toolkit of fluorescent indicators as key enablers for a new era of imageomics.     

室温铁磁性Sr3YCo4O10.5+δ多晶有序化的烧结工艺及电磁性能

采用固相反应法制备了不同烧结温度(950~1 180 ℃)、烧结时间、烧结次数共7种工艺的Sr₃YCo₄O_10.5+δ多晶块材,通过热分析、XRD、SEM确定了有序化相变和最佳烧结工艺(1 180 ℃/24 h+1 180 ℃/24 h),并研究了多晶的电磁性能。结果表明,964 ℃完全晶化的四方相Sr₃YCo₄O_10.5在1 042 ℃吸氧(δ)完成有序化,生成Sr₃YCo₄O_10.5+δ,而1 100 ℃和1 180 ℃烧结的样品均出现(103)、(215)超结构峰,验证了其结构的有序性。块材均呈半导体电输运行为,二次烧结晶格完整性提高,晶粒长大,300 K时电阻率仅为0.06 Ω·cm,居里温度(T_c)~335 K,零场冷曲线(ZFC)上的Hopkinson峰源于低温时被冻结的磁矩随温度升高转向磁场方向,磁化强度在298 K达到最大,随后受热扰动的影响减小。室温铁磁性源于有序结构导致的中自旋或高自旋态Co³⁺的e_g轨道有序。     

Negative compressibility property in hinging open-cell Kelvin structure

A new three-dimensional(3 D) cellular model based on hinging open-cell Kelvin structure is proposed for its negative compressibility property. It is shown that this model has adjustable compressibility and does exhibit negative compressibility for some certain conformations. And further study shows that the images of compressibility are symmetrical about the certain lines, which indicates that the mechanical properties of the model in the three axial directions are interchangeable and the model itself has a certain geometric symmetry. A comparison of the Kelvin model with its anisotropic form with the dodecahedron model shows that the Kelvin model has stronger negative compressibility property in all three directions.Therefore, a new and potential method to improve negative compressibility property can be derived by selecting the system type with lower symmetry and increasing the number of geometric parameters.     

In Situ Generated Gold Nanoparticles on Active Carbon as Reusable Highly Efficient Catalysts for a C −C Stille Coupling

Gold nanoparticle catalysts are important in many industrial production processes. Nevertheless, for traditional C ?C cross‐coupling reactions they have been rarely used and Pd catalysts usually give a superior performance. Herein we report that in situ formed gold metal nanoparticles are highly active catalysts for the cross coupling of allylstannanes and activated alkylbromides to form C ?C bonds. Turnover numbers up to 29 000 could be achieved in the presence of active carbon as solid support, which allowed for convenient catalyst recovery and reuse. The present study is a rare case where a gold metal catalyst is superior to Pd catalysts in a cross‐coupling reaction of an organic halide and an organometallic reagent.     

氧离子传导型固体氧化物电解池燃料电极的研究进展

固体氧化物电解池可高效地电解H₂O/CO₂制备燃料,越来越受到人们的重视. 本文对近年来在燃料电极（阴极）材料方面的研究进展进行了全面综述,指出各种阴极材料的优缺点及发展趋势,强调亟待解决的关键科学与技术问题.     

基于平面度的燃料电池电化学性能模拟

 固体氧化物燃料电池的翘曲会影响电极-盖板界面的接触情况，从而影响电化学性能，对相关制造工艺提出了很大的挑战．为了分析燃料电池平面度对放电过程的影响，揭示其潜在的风险，我们建立了两个基于有限元法的仿真模型，对考虑平面度缺陷的燃料电池封装和放电进行分析．在对固体氧化物燃料电池进行平面度测量的基础上，首先建立了具有真实燃料电池翘曲特性的几何模型，分析封装过程中接触压力的分布情况．然后将接触电阻的仿真结果导入到三维多物理场耦合模型中，模拟具有平面度缺陷的燃料电池电化学性能．计算结果展示了燃料电池两侧封装过程中接触压力的分布情况．通过对比有接触电阻和无接触电阻的燃料电池电流密度，分析了电池与盖板的接触对放电过程的影响．结果表明，燃料电池的凹陷面较难达到满意的接触状态，需要比凸起面更大的封装压力．燃料电池表面接触电阻的变化将引起电流传导路径的变化，产生局部高电流或低电流．这项工作强调了在燃料电池中保持均匀分布的接触电阻的重要性，为今后的优化工作奠定了基础．     

单气室固体氧化物燃料电池的材料、微堆结构与相关应用

单气室固体氧化物燃料电池（SC-SOFC）是一种整个电池处在单一气室中,阳极和阴极分别对混合气体中的燃料和氧气进行选择催化产生电动势的特殊结构燃料电池. SC-SOFC因其独特的原理和结构而具有无需密封、易于堆叠、可以快速启动和不易发生积碳等诸多优点,有很大的应用潜力. 作者在SC-SOFC的原理和特点的基础上,系统地总结了SC-SOFC所用材料、微堆结构设计、衰退机制及应用方面的研究进展;以提高SC-SOFC微堆的输出电压和功率为目的,改进预混气体环境下运行的微堆结构,采取星型布局的四电池微堆其输出功率提高到420 mW;随后,逐步改进供气方式,结合计算流体力学数值模拟研究,提出了单路多点供气和双路多点供气模式,成功地将单个SC-SOFC微堆模块的输出功率提升到8.178 W,进而开展了微堆模块外部串并联和与燃烧器的结合实验验证. 研究结果表明,SC-SOFC可以很便捷地连接成微堆模块并产生数瓦的输出功率,未来有望用于以供热为主型的热电联供系统. 作者还借助原位电阻和开路电压的原位同步测试,阐明了Ni在CH₄-O₂气氛中的反复氧化-还原循环是SC-SOFC发生不可逆衰退的主要机制,这一发现后来催生出氧化-还原法制备多孔金属的新技术.     

Synthesis and Cellular Labeling of Caged Phosphatidylinositol Derivatives

Phosphatidylinositol (PI) is the biosynthetic precursor for seven phosphoinositides, important signaling lipids in cells. A membrane-permeant caged PI derivative featuring a photo-removable coumarinyl group masking the negative charge of the phosphate, as well as two enzymatically removable butyrate esters for increased lipophilicity and for preventing phosphate migration, were synthesized. Rapid cell entry and cellular labeling in fixed cells was demonstrated by a photo-cross-linkable diazirine followed by attachment of a fluorophore through click chemistry. Using this technique, we found that the multifunctional caged PI derivative resided predominantly at internal membranes but rapidly changed to the plasma membrane after uncaging. Accordingly, a preliminary proteomic analysis of the lipid–protein conjugates revealed that the two major PI transport proteins PITPα and β were prime targets of the photo-cross-linked PI derivative.